How to set a Static IP Address in Windows 10

If you lot are experiencing problem amongst your network connexion as well as accept it configured to DHCP then, figuring out your IP address tin hold upwards quite a task. Using Static IP Address helps avert IP address conflicts betwixt networked devices as well as enables their tardily management. This article volition exhibit you lot how to assign a static IP address on a Windows 10 computer.

Assign a static IP address inwards Windows 10

In near cases, the IP addresses for PCs or computers is automatically configured to Dynamic Host Configuration Protocol (DHCP) past times the respective router. This is useful equally the devices connect to your network instantly. You salve the problem of manually configuring the IP address for each novel device yourself. However, there’s 1 shortfall associated amongst the procedure – The device’s IP address tin alter from fourth dimension to time.

Setting a static IP may hold upwards required if you lot regularly percentage files, percentage a printer or when configuring Port forwarding.

We volition run into 3 methods to produce it:

1. Via Control Panel
2. Via Windows Settings
3. Using PowerShell.

1] Setting a static IP address via Control Panel

Right-click the network (or Wi-Fi) icon visible on Windows 10 Taskbar.

From the listing of 2 options displayed, select the latter 1 – Open Network as well as Internet settings.

Go to Wi-Fi settings as well as scroll downwards a fight to locate ‘Related Settings’ section. When flora click on the ‘Change adapter options’ link visible there.

Instantly, a split window volition opened upwards as well as directly you lot to the Network Connections department of the Control Panel.

Right-click the network connexion you lot demand to laid a static IP-address for as well as select ‘Properties‘ option.

After that, select Internet Protocol Version iv (TCP/IPv4) seen nether ‘Networking’ tab as well as striking the ‘Properties’ button.

Switch the selector to ‘Use the next IP address’.

Now brand the entry for the next fields, corresponding to your network setup.

1. IP address (Find it using ipconfig /all command)
2. Subnet Mask (On a domicile network, it is 255.255.255.0)
3. Default Gateway (It is your router’s IP address.)

In the end, produce non forget to banking concern check ‘Validate settings upon exit’ option. It helps Windows to speedily banking concern check your novel IP address as well as other relevant data to ensure that it works.

If all looks good, press the ‘OK’ push as well as unopen out of the network adapter’s properties window.

2] Assign Static IP Address via Settings

Click Settings icon as well as pick out ‘Network & Internet’ tab.

Select Wi-Fi > Current connection, i.e., network to which you lot are connected.

Scroll downwards to IP settings department as well as striking the Edit button.

Then, when the ‘IP settings’ window pops up, striking the drop-down arrow as well as select ‘Manual‘ option.

Turn on the IPv4 toggle switch.

Now, laid the static IP address. Also, laid the Subnet prefix length (subnet mask). If your subnet mask is 255.255.255.0, as well as thence the subnet prefix length inwards bits is 24.

Once done, configure the Default Gateway address, Preferred DNS address as well as  Save the changes.

3] Assigning Static IP Address via PowerShell

Open Powershell equally Administrator as well as larn into the next ascendency to stance your electrical current network configuration-

Get-NetIPConfiguration

Following this, Federal Reserve annotation downwards the next information:

1. InterfaceIndex
2. IPv4Address
3. IPv4DefaultGateway
4. DNSServer.

After that, larn into the next ascendency to laid a static IP address as well as press Enter.

New-NetIPAddress -InterfaceIndex fifteen -IPAddress 192.168.29.34 -PrefixLength 24 -DefaultGateway 192.168.29.1.

Now, alter DefaultGateway amongst the default gateway address of your network. Make certain to alter the InterfaceIndex publish amongst the 1 corresponding to your adapter as well as IPAddress amongst the IP address you lot desire to assign to your device.

When done, Type the next ascendency to assign a DNS server address as well as press Enter.

Set-DnsClientServerAddress -InterfaceIndex iv -ServerAddresses 10.1.2.1

Save the changes as well as exit.

I promise this helps.

Source: https://www.thewindowsclub.com/

Share This :