MASIGNCLEAN104

How to fix error 0xc000000e, Your PC needs to be repaired, on Windows 10

iklan banner

Recovery Error code 0xc000000e, Your PC needs to hold upwardly repaired, indicates a hardware failure or an wrong drive configuration, too may hold upwardly accompanied past times unlike mistake messages like:

  1. A required device isn’t connected or cannot hold upwardly accessed
  2. Required device is inaccessible
  3. The selected entry could non hold upwardly loaded
  4. The selected entry could non hold upwardly loaded because the application is missing or corrupt
  5. The kick alternative failed because a required device is inaccessible.

 indicates a hardware failure or an wrong drive configuration How to ready mistake 0xc000000e, Your PC needs to hold upwardly repaired, on Windows 10

0xC000000E, or STATUS_NO_SUCH_DEVICE, indicates a hardware failure or an wrong drive configuration. Check your cables too banking enterprise gibe the drive amongst the diagnostic utility available from your drive manufacturer. If you lot are using older PATA (IDE) drives, this condition code tin displace squall for an wrong master/subordinate drive configuration.

The unlike causes for these errors are either the winload.exe file is non accessible or is corrupt, or the kick location for the operating organization cannot hold upwardly located. So, inward monastic enjoin to kick into too access our operating system, nosotros ask to undertake the next fixes.

Fix mistake 0xc000000e on Windows

Let us get-go listing the full general fixes for all the scenarios. See which 1 may apply inward your case:

  1. Rebuild BCD.
  2. Use Automatic Repair Utility.
  3. Check Physical Device connections.
  4. Check Windows 8.1/10 WHQL Support setting inward BIOS
  5. Reset BIOS/UEFI Configuration.
  6. Mark your Disk every bit Online.

1] Rebuild Boot Configuration Data file

To rebuild BCD, start past times creating a Bootable Windows 10 Media.

After booting from it, click on Repair your computer on the get-go Windows 10 installation setup window. Select the operating organization division from the options you lot instruct too and then click on Next.

Choose Command Prompt within the System Recovery Options box. Execute the next command:

bootrec /rebuildbcd

Once the ascendence job is successful inward finding out a Windows Installation, you lot ask to hit to allow it kick from the list. This volition rebuild BCD.

2] Run Automatic Repair Utility

You tin displace too endeavour to run Automatic Repair. Check if this fixes whatever conflicts resulting inward that error.

3] Check Physical Device Connections

You should get-go banking enterprise gibe if whatever other devices are connected to your computer. This is thus because of the configuration of the BIOS or UEFI powerfulness hold upwardly configurated inward such a agency that whatever external device attached has a higher kick priority than that of the difficult disk. If this is so, the externally attached disk powerfulness hold upwardly the drive your estimator is trying to kick into.

Usually Pen Drivers, other USB Storage Devices, CDs, DVDs, etc. are included inward this category of devices.

4] Check Windows 8.1/10 WHQL Support setting inward BIOS

Open BIOS too banking enterprise gibe the Windows 8.1/10 WHQL Support setting. If it is disabled, alter it to Enabled.

5] Reset BIOS/UEFI Configuration

You tin displace too endeavour to reset the BIOS configuration. This volition Pb to arranging the kick configuration every bit it is intended past times the manufacturer. This volition take whatever blockage inward the kick process.

6] Mark your Disk every bit Online

Create a Bootable Windows 10 Media. After booting from it, click on Repair your computer on the get-go Windows 10 installation setup window.

Select the operating organization division from the options you lot instruct too and then click on Next.

Choose Command Prompt within the System Recovery Options box.

Now, type in-

diskpart

This volition initiate the Diskpart utility within of the Command Prompt.

Then type inward either-

list disk

or

list volume

These commands volition assistance you lot inward either listing all the Disks connects or all the partitions on those disks formed.

From here, you lot volition guide maintain to guide 1 ascendence depending on the list command you lot entered.

Type in,

select disk #

or

select book #

Hit Enter. This volition select the Disk or Partition you lot desire to select.

Finally, type in,

online disk #

or

online book #

Then hit Enter. This volition score the selected disk every bit Online.

Something hither is certain to assistance you!


Source: https://www.thewindowsclub.com/
Share This :